Electric water heaters are more energy-efficient and last longer than other choices. These water heaters are sometimes referred to as geysers, and there are a few things to think about before purchasing one for your house.
Winter is on its way, and in most parts of the country, a reliable supply of hot water will be critical. Electric water heaters are easier to operate, safer, and more convenient than other types of water heaters, such as immersion rods. These water heaters are less expensive than gas-powered water heaters in terms of cost, operation, or even installation. Before purchasing a geyser, it is important to evaluate the heating element since hard or soft water can harm the heating components as well as the interior tank.
How Water Geyser Works?
The heating element, the thermostat, and the storage tank are the three basic components of an electric water geyser. Any electric water heater's heating element is the most significant component. Heating elements with a glass lining are highly good in preventing scaling and extending the equipment's lifespan.
In geyser technology, the latter is innovative and improved types. These are the same stainless steel tanks that have been coated with sophisticated polymers to prevent rust and hard water scaling. Glassline coating is quite similar to glass enamel coating. Because the storage tank is used to store hot water, it must be sturdy and corrosion-resistant. Stainless steel storage tanks and glass-enameled, glass-coated storage tanks are the two types of storage tanks available. Due to corrosion from hard water scaling, stainless steel ones are becoming outdated.
The thermostat in any geyser serves as the appliance's operational system, determining when to start and stop heating the water. Steel and copper are commonly used to make bimetallic bars. This strip is connected to a thermostat, which makes decisions depending on the bimetallic strip's reaction. The temperature change is often converted into mechanical displacement using a bimetallic bar. If your water heater has a thermostat, it doesn't imply you can keep the geyser running. A proper thermostat will keep the water from overheating. It also aids in the reduction of power usage to a degree.
You may like to read: All you need to know about Mattress, Best Mattress Companies in India
The thermostat will inform the heating element to start heating the water when you switch on your geyser and presume the water temperature is 20°C. The thermostat signals the heating element to turn off the heat when the water temperature reaches 60 degrees Celsius. If you fail to switch off the geyser for a few hours, the water temperature decreases to 29 degrees Celsius, and the thermostat instructs the heating element to re-heat the water. This continues indefinitely until the geyser is turned off.
A crucial decision to make when purchasing a geyser is to choose one from a reputable manufacturer. Branded water heaters come with warranties, safety features, and customer service. Unbranded ones may appear to be inexpensive, but they will not satisfy the needed requirements and may be dangerous. Always choose geysers that disclose the material used in the storage tank as well as the energy conservation rating. If you don't want to spend a fortune on geyser maintenance, be sure the geyser you're buying has the ISI mark.
| Brand | Dealer Locator |
|---|---|
| Anchor | Anchor Geyser Dealers |
| AO Smith | AO Smith Geyser Dealers |
| Arise | Arise Geyser Dealers |
| Bajaj | Bajaj Geyser Dealers |
| Butterfly | Butterfly Geyser Dealers |
| Crompton | Crompton Geyser Dealers |
| Faber | Faber Geyser Dealers |
| Ferroli | Ferroli Geyser Dealers |
| Haier | Haier Geyser Dealers |
| Havells | Havells Geyser Dealers |
| Hindware | Hindware Geyser Dealers |
Factors to Consider Before Buying Geyser
- Size of the Geyser:
When purchasing a geyser, the size of the geyser is what your household needs. The ideal size is close to the amount of hot water required at any given time. Ideal geyser sizes provide enough water for immediate consumption, but it's always a good idea to figure out what size geyser your household need.
- For a bath using a bucket, a 6-liter instant geyser or a 10 to 15-liter storage geyser is required for a small family of 2-3 persons.
- Even if you shower with a bucket, a 25-liter storage geyser is required if you have a big family of 4-8 individuals.
- A 6-liter quick geyser, on the other hand, will be enough for kitchen utensils and washbasin demands.
- For a bath using a bucket, a 6-liter instant geyser or a 10 to 15-liter storage geyser is required for a small family of 2-3 persons.
- Shape of Geyser:
- Vertical Geyser: The most common geysers found in Indian houses are vertical geysers. Vertically mounted geysers are relatively new on the market, and they may save a lot of wall space. These horizontal geysers are ideal for instances when the bathroom ceiling is low. The majority of geysers on the market are vertical geysers. A geyser is about 2 feet long. So, if you want to place a geyser vertically, you'll need at least 2 feet of wall space between the ceiling and the geyser.
- Horizontal Geyser: The horizontal geyser, as the name implies, is mounted horizontally on the bathroom or kitchen wall. When the wall space is really low from the ceiling and you don't have enough room, you'll need a horizontal geyser. It needs sufficient side room for repairs and maintenance. Otherwise, you may need to unmount the geyser if you need to repair or inspect it. So, before you install anything, think about all of these things.
- Vertical Geyser: The most common geysers found in Indian houses are vertical geysers. Vertically mounted geysers are relatively new on the market, and they may save a lot of wall space. These horizontal geysers are ideal for instances when the bathroom ceiling is low. The majority of geysers on the market are vertical geysers. A geyser is about 2 feet long. So, if you want to place a geyser vertically, you'll need at least 2 feet of wall space between the ceiling and the geyser.
Types of Geysers
In our nation, there are two types of electric water geysers: instant water heaters and storage water heaters. The following is an explanation of the differences between the two:
Instant Geyser
This is inconvenient for bathing since it can only release a little amount of water in a single heating cycle, and users may have to wait for more once that amount has been used up. These gadgets occupy a minimal amount of wall space, and when the geyser is switched on, the user has rapid access to hot water.
Because the hot water is utilized quickly and is appropriate for cooking utensils, washbasins, and baths, it is regarded to have minimal water heating expenses. Using a bucket The lack of water storage tanks in these geysers extends their longevity. The majority of immediate geysers have a capacity of 10 liters and are slightly more expensive than storage geysers.
Because the hot water is utilized quickly and is appropriate for cooking utensils, washbasins, and baths, it is regarded to have minimal water heating expenses. Using a bucket The lack of water storage tanks in these geysers extends their longevity. The majority of immediate geysers have a capacity of 10 liters and are slightly more expensive than storage geysers.
Storage Geyser
These devices often take up a lot of wall space, and in this instance, consumers must wait a long time for the hot water to drain. This waiting period allows the geyser to retain vast volumes of water, allowing customers to shower without having to reheat the water.
It is less expensive than an instant water heater, but it has a greater heating cost since the hot water is used up faster. These geysers, which range in size from 6 to 35 liters, are better suited for bathroom use. These heaters are thought to have a shorter lifespan than instant water heaters.
It is less expensive than an instant water heater, but it has a greater heating cost since the hot water is used up faster. These geysers, which range in size from 6 to 35 liters, are better suited for bathroom use. These heaters are thought to have a shorter lifespan than instant water heaters.
Hard Water Geyser
When mineral salts such as magnesium and calcium are present in large amounts in water, it is referred to as hard water, and it is unsuitable for everyday tasks such as washing clothes, bathing, and cooking. A hard water geyser, as the name implies, is especially beneficial when the water source is hard water.
Related Article: How to Choose the Best Air Purifier, Step-by-step Guide 2022 Checklist
Choose Geyser with Lower Capacity
Consider what you require and, if feasible, choose a smaller water capacity geyser, as a 25-liter water geyser would consume far more power than a 15-liter or 10-liter geyser. It's very uncommon to purchase a 25-liter geyser when you require a 15-liter geyser. Why would you buy a 25-liter hot water geyser if a 15-liter geyser will suffice? As a result, go through our geyser buying advice thoroughly before making your selection. As a result, the lower the water capacity, the lower the electric usage.
When we use an immersion rod to heat a bucket of water, a significant quantity of heat is lost to the surrounding air and environment. A geyser uses less energy than an immersion rod heater. An immersion rod is a simple water heater that isn't meant to keep heat from escaping into the atmosphere. In addition, heating the same quantity of water and using the same amount of power takes a lot longer using an immersion rod.
A geyser, on the other hand, boils water faster than an immersion rod. Because of the insulated water tank, the heat in the water cannot escape into the atmosphere. The shorter the heating time, the less energy is consumed, and the lower the electricity bill. So, even though both the geyser and the heater use the same wattage of power, the geyser is the better choice since it heats water faster. Time is crucial in this situation. As a result, a geyser will use less energy than an immersion rod.
